MIL-STD-2189(SH)
SECTION 672-1
24 December 1987
1.
GENERAL AND SCOPE
1.1 General. The procedures established by MIL-STD-2189 are applicable.
This section and the basic standard are to be considered as an integral single
document.
1.2 Scope. This standard establishes the method of calculating storeroom
data and provides the format for documenting the storeroom capacity table.
2.
REFERENCED DOCUMENTS
2.1
Government documents.
2.1.1 Standard. Unless otherwise specified, the following standard of
the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation forms a
part of this standard to the extent specified herein.
STANDARD
MILITARY
MIL-STD-2189 - Design Methods for Naval Shipboard Systems.
(Copies of standards required by contractors in connection with specified
acquisition functions should be obtained from the contracting activity or as
directed by the contracting officer.)
2.2 Order of precedence. In the event of a conflict between the text of
this standard and the references cited herein, the text of this standard shall
take precedence,
3.
DEFINITIONS
3.1 Deck area. Deck area is the area in square meters or square feet of
the storeroom compartment within the boundaries of the bulkheads and bottom of
shell plating. The area includes floor plates when these are installed.
3.2 Packing factor. Packing factor is the ratio of the net stowage
capacity to the gross stowage capacity expressed as a percentage for the
particular stowage aid. This is a standard percentage based on studies and
analyses of past stowage aid utilization and is not to be modified or derived
during the current calculations.
3.3 Percent of storeroom utilization.
Percent of storeroom utilization
is the ratio of the storeroom net volume to the storeroom gross volume
expressed as a percentage.
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business