DOD-HDBK-269 - Fitting Out Handbook - Ships
The purpose of this handbook is to provide information and guidance to all persons in the Department of the Navy. It contains policies and procedures to attain the objectives set by NAVMAT.
DOD-STD-1399-204 - Interface Standard For Shipboard Systems Section 204A Ambient Air Conditions In Surface Ship Compartments (Metric)
DOD-STD-1399-301 - Interface Standard For Shipboard Systems Section 301A Ship Motion And Attitude (Metric)
This section establishes interface requirements for ship structure, appurtenances, fittings, machinery, systems, and equipment which are affected by ship motions to ensure compatibility between such ship structure, and so forth, and the effects of ship motion and attitude.
DOD-STD-1399-441 - Interface Standard For Shipboard Systems Section 441 Precise Time And Time Interval (Ptti)
This section establishes interface requirements for shipboard equipment utilizing the Precise Time and Time Interval (PTTI) Platform Distribution System (PDS) in order to ensure compatibility between the user equipment and the PTTI PDS.
DOD-STD-1399-532 - Interface Standard For Shipboard Systems Section 532 Cooling Water For Support Of Electronic Equipment (Metric)
This section establishes interface requirements for shipboard electronic equipment utilizing the cooling water support system to ensure compatibility between such equipment and the cooling water support system.
DOD-STD-1399-533 - Interface Standard For Shipboard Systems Section 533 Potable Water Service (Metric)
This section establishes interface requirements for shipboard equipment utilizing potable water services to ensure compatibility between such equipment and the potable water service system.
DOD-STD-1399-703 - Interface Standard For Shipboard Systems Section 703 Weapons Handling
This section establishes interface requirements for the coordination of the design of shipboard weapons handling systems and the weapons to ensure compatibility between the handling systems and the weapons involved.
DOD-STD-1399-71 - Interface Standard For Shipboard Systems Section 071 Mass/Size/Shape, Shipboard Units (Metric)
This section establishes interface requirements for units of shipboard equipment with regard to mass/size/shape to ensure compatibility between such units and the shipboard access geometry environment.
MIL-B-18147 - Boats And Craft; Preparation For Delivery Of
This specification covers the requirements for the packaging, loading and marking of boats and craft (approximately 100 feet and under) open and cabin types, with or without installed power plants such as landing craft, personnel and utility boats, patrol boats, motor whaleboats and special warfare craft together with their associated accessories, spare and repair parts and technical data (drawings and manuals).
MIL-HDBK-297 - Introductions To Weapon Effects For Ships (Metric)
This handbook has been prepared to provide a tutorial on the basic concepts of explosion phenomena and damage effects from nuclear and non-nuclear weapons. It is recommended reading for engineers desiring an introduction to these subjects as they relate to the vulnerability or survivability of ships and mission essential weapons systems, and to passive protection design.
MIL-HDBK-843 - Ship Metallic Material Comparison
This handbook provides Naval Sea Systems Command (NAVSEA) guidance for the selection or substitution of the most common material types and forms used in ship design, construction, overhaul, or repair. Recommended specifications have been established and cross-indexed to prior specifications. By using the consolidated material specifications provided by this handbook, the volume of redundant specifications, stock numbers, and associated material inventories can be reduced.
MIL-STD-1399 - Interface Standard For Shipboard Systems
This standard establishes interface requirements for shipboard equipment to ensure compatibility between such equipment and the shipboard environment in which they will be installed.
MIL-STD-1399-102 - Interface Standard For Shipboard Systems Section 102 Low Pressure Dry Air Service For Surface Ships
MIL-STD-1399-300 - Electric Power, Alternating Current
This military standard section establishes electrical interface characteristics for shipboard equipment utilizing AC electric power to ensure compatibility between user equipment and the electric power system. Characteristics of the electric power system are defined and tolerances are established, as well as requirements and test methods for ensuring compatibility of shipboard user equipment with the power system. The policies and procedures established by MIL-STD-1399 are mandatory. This section and the basic standard are to be viewed as an integral single document for use in the design and testing of electric power systems and user equipment.
MIL-STD-1399-302 - Interface Standard For Shipboard Systems Section 302 Weather Environment
MIL-STD-1399-390 - Interface Standard For Shipboard Systems Section 390 Electric Power, Direct Current, (Other Than Ship'S Battery) For Submarines (Metric)
MIL-STD-1399-401 - Interface Standard For Shipboard Systems Section 401 D.C. Magnetic Field Environment (S/S Dod-Std-1399, Section 070-Part 1)
MIL-STD-1399-406 - Interface Standard For Shipboard Systems Section 406 Digital Computer Grounding (Metric)
This section establishes a standard ground system and the requirements for grounding shipboard digital computer equipment, to ensure compatibility between such grounding systems and digital computer systems/equipment which will enhance system operational reliability.
MIL-STD-1399-501 - Interface Standard For Shipboard Systems Section 501 Nomenclature, Electronic And Weapons Control Functions
This section is an integral part of DOD-STD-1399 and the policies and procedures established therein are mandatory.
MIL-STD-1399-502 - Interface Standard For Shipboard Systems Section 502 Electronic Systems Parameters
MIL-STD-1399-534 - Interface Standard For Shipboard Systems Section 534 Auxiliary Steam Service, Surface Ships
MIL-STD-1624 - Ship Compartment Standard Nomenclature (S/S By Dod-Std-2150)
This standard provides a list of standard compartment names for use by designers, shipbuilders and repair facilities involved in ship compartment definations.
MIL-STD-2189 - Design Methods For Naval Shipboard Systems (S/S By Mil-Hdbk-2189)
This standard provides a guide for conducting 400 hertz (Hz) power system tests to determine that the 400 Hz power system is compatible with the equipment served and that the system characteristics are within the limits specified in DOD-STD-1399, section 300.
MIL-STD-2189-100-1 - Design Methods For Naval Shipboard Systems Section 100-1 Reinforcement Of Openings In Structure Of Surface Ships Other Than In Protective Plating (For Guidance See Navsea Dds-100-1)
The procedures established by MIL-STD-2189 (SH) are applicable.
MIL-STD-2189-302-1 - Design Methods For Naval Shipboard Systems Section 302-1 Ac Motor And Controller Application Requirements
The procedures established by MIL-STD-2189 are applicable. This section and the basic standard are to be considered as an integral single document.
MIL-STD-2189-305-1 - Design Methods For Naval Shipboard Systems Section 305-1 Designation And Marking Of Electric System
The procedures established by MIL-STD-2189 (SH) are applicable. This section and the basic standard are to be consideredas an integral single document.
MIL-STD-2189-310-1 - Design Methods For Naval Shipboard Systems Section 310-1 Electric System Load And Power Analysis For Surface Ships
The procedures established by MIL-STD-2189 are applicable. This section and the basic standard (MIL-STD-2189) are to be considered as an integral single document.
MIL-STD-2189-314-4 - Design Methods For Naval Shipboard Systems Section 314-4 400 Hertz Power System Test Procedure
MIL-STD-2189-562-2 - Design Methods For Naval Shipboard Systems Section 562-2 Control Surface Structure Design (For Guidance See Mil-Hdbk-2189/562-2)
This standard is issued to provide a design procedure for control surface structure design.
MIL-STD-2189-672-1 - Design Methods For Naval Shipboard Systems Section 672-1 Calculation Of Storeroom Capacities (For Guidance See Mil-Hdbk-2189/672-1)
This standard establishes the method of calculating storeroom data and provides the format for documenting the storeroom capacity table.
Fitting) (S/S By Nas835)
MIL-C-5501/4 - Cap And Plug, Protective,Dust And Moisture Seal (Cap-Beaded Hose Connection) (S/S By Nas839)
MIL-C-5501/5 - Cap And Plug, Protective, Dust And Moisture Seal (Plug Pipe Thread) (S/S By Nas840)
MIL-C-5501/6 - Caps And Plugs, Protective, Dust And Moisture Seal (Cap - Pipe Thread) (S/S By Nas846)
MIL-C-5501/7 - Cap And Plug, Protective, Dust And Moisture Seal (Cap Plug, General Purpose (S/S By Nas834)
MIL-C-5501/8 - Cap And Plug, Protective, Dust And Moisture Seal (Plug Tubing) (S/S By Nas843)
MIL-C-5501/9 - Cap And Plug, Protective Dust And Moisture Seal (Cap Tubing) (S/S By Nas844)
MIL-C-6390 - Clamps And Instruments, Aircraft, Installation Of
This specification covers the installation of clamp-mounted aircraft instruments.
MIL-C-85449 - Clamp Assembly, Saddle-Type, Cushion, General Specification For (S/S By Nasm85449)
This specification covers tube support saddle-type clamps. Tests and criteria noted do not indicate any specific areas of application or usage. Supplement testing may be necessary to determine suitability for specific environments and applications.
MIL-C-85449/1 - Clamp Assembly, Saddle Type, Cushioned, Nbr Rubber, 321 Cres, 275 Degrees F, Fuel Resistant, General Purpose (S/S By Nasm85449/1)
MIL-C-85449/2 - Clamp Assembly, Saddle Type, Cushioned, Epr Rubber, 321 Cres, 275 Degrees F, General Purpose (S/S By Nasm85449/2)
MIL-C-85449/3 - Clamp Assembly, Saddle Type, Cushioned, Silicone Fabric, Reinforced 321 Cres, 500 Degrees F, General Purpose (S/S By Nasm85449/3)
MIL-C-85449/4 - Clamp Assembly, Saddle-Type Cushioned, Ptfe, 321 Cres, -320 Degrees F To 450 Degrees F, General Purpose (S/S By Nasm85449/4)
MIL-C-8603 - Clamps, Loop Type, And Straps, Support
This specification covers support loop clamps, both cushioned and non-cushioned, for the clamping of wire bundles and non-hydraulic tubing (see 6.1).
MIL-C-87972 - Casters, Rigid And Swivel, General Specification For
This specification covers rigid and swivel casters for aircraft maintenance stands in flightline use.
MIL-C-8956 - Clamps, Loop, Tube Support (For Future Req. Use Mil-C-8603 & Mil-C-85052
MIL-D-1552 - Dees, Cheek
MIL-D-43599 - Caster, For Institutional Duty
MIL-DTL-15021 - Hook, Snap Bolt, Swivel-Eye, And Rings
This specification covers snap bolt, swivel-eye hooks and rings for application requiring rapid attachment and easy detachment for temporary fastenings (see 6.1).
MIL-DTL-24625 - Anodes, Impressed Current Cathodic Protection - Platinized Type
This specification covers platinized anodes for impressed current cathodic protection applications.
MIL-DTL-27536 - Coupling, Clamp, Grooved, V-Band (S/S By Sae-As5355)
This specification establishes the general requirements for V-band grooved clamp couplings.
MIL-DTL-29181 - Hasp, High Security, Shrouded, For High And Medium Security Padlock
This specification covers hasps for high and medium security padlocks.
MIL-DTL-43607 - Padlock, Key Operated, High Security, Shrouded Shackle
This specification covers a key operated, high security, shrouded shackle padlock that employs a dead bolt locking system. The padlock will have three different versions with varying cylinders and external markings as specified herein; all three versions will meet the requirements of this specification.
MIL-DTL-45918 - Clevises And Connectors (Rod End)
This specification covers adjustable and plain rod end clevises and rod end connectors.
MIL-DTL-5683 - Terminal; Tie Rod, Threaded Clevis Type, Aircraft
This specification establishes the requirem
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business